KAVAN EPOXY 5min / 2* 50g - resin

Two-component fast-drying epoxy resin from Kavan.

Basic properties:

• Suitable for bonding: soft and hard wood, particleboard, plywood, metals, polystyrene foam, ceramics, porcelain, glass and carbon laminates, fabrics and glass and carbon fibers
• Not suitable for bonding: soft and flexible plastics (including EPP and EPO), polyethylene, Teflon
• Use as putty, suitable fillers: microballoons, talc, baby powder, diatomaceous earth, fine balsa or lime sawdust, chopped glass fibers. Note - the addition of mastic can reduce working time by up to 25% and (depending on the type and amount of mastic used) reduce the strength of the joint
• Working time (for gelation): about 5 min (20 ° C to 25 ° C)
• Bonded parts can be handled: after 15-20 min
• Half strength: after 10-15 min
• Full strength: after 2-3 hrs
• Full cure: 16-24 hrs
• Color: transparent
• Mixing ratio of ingredients: 1:1 (by volume and weight)
• Note 1: The curing of the adhesive depends mainly on the ambient temperature; if a large amount of epoxy resin is mixed at the same time (usually more than 20-30 g), it can harden much faster - to maintain a longer working time, the adhesive should be cooled, for example, in a water bath. This is due to the fact that heat is given off during the reaction of the resin with the hardener, while at the same time the resin hardens faster at higher temperatures. And because as the volume increases, the weight of the resin (and thus the amount of heat generated) increases faster than the size of the outer surface from which heat is dissipated to the environment, more resin heats up and cures faster
• Note 2: Originally transparent and quite liquid epoxy resins based on bisphenol A and epichlorohydrin can sometimes thicken ("sugar") like bee honey) and lose their transparency - this is due to the effects of low temperatures, moisture or the passage of time. By carefully heating in hot water (60-70 ° C) for a few minutes, until the resin becomes clear again throughout, you can get the resin "like new" again, with its original properties.
• Always use protective clothing that meets health and safety requirements.
• Keep the product out of the reach of children.
• The product contains substances classified as hazardous.

Package: 2 x 50 g

*Follow the instructions provided with the product, follow the safety rules.

Warning:

• Contains: reaction product of bisphenol A with epichlorohydrin: epoxy resin (average molecular weight ⩽ 700). May cause allergic skin reaction.
• Keep out of the reach of children. Wear protective gloves / protective clothing / eye protection
• In case of skin contact: wash with plenty of soap and water. In case of skin irritation or rash - seek medical advice.
• Dispose of empty containers to hazardous waste collection point.
• Contains epoxy components. May cause an allergic reaction
• Product data sheet - see attachment above under