PIKO 56122 DRIVING AND LIGHTING DECODER 8 - PIN FOR DCC LOCOMOTIVES
Driving and lighting decoder for Hobby 8 - pin series locomotives.
The PIKO 56122 locomotive decoder is a small, powerful multi-protocol decoder. he can w
DCC and Motorola** digital systems, and also work in analog mode
with DC voltage or with AC voltage and overvoltage pulse reversal (Märklin* system).
The decoder operates at 18.75 KHz and is therefore suitable not only for DC motors, but also for coreless motors (e.g. Faulhaber, Maxon, Escap), continuous current consumption 1A. Short-term higher inrush currents are well tolerated.
Motor characteristics are set by minimum, average and maximum speed.
Load control can be individually adjusted for different locomotive engines using control parameters.
The decoder has two direction-dependent light outputs.
Using function keys f3 and f4, the shunting gear with extended slow travel range and the start-brake delay can be switched.
The decoder can be programmed with PIKO Digi-Power-Box, DCC and Märklin* controllers.
All CVs can be programmed with all devices.
Upon delivery, the decoder automatically recognizes DCC and Motorola data formats, as well as
suitable analog operation with DC or W
Features:
- Adjustable multi-protocol decoder for DCC and Motorola
- Suitable for DC and coreless motors up to 1 A
- Quiet motor operation due to motor control at 18.75 KHz
- 14, 27, 28, 128 speed steps, depending on data format
- Short (1-127) and long (128-9999) addresses
- NMRA compliant
- Adjustable minimum, maximum and average speed
- Programming on the main (DCC)
- Shunting gear (half speed) switched by F3
- Acceleration/braking delay switched by F4
- Direction-dependent lighting, dimmable, switched by F0
- Reacts to DCC-compliant braking signal or braking sections with DC voltage
- All outputs protected against short circuit
- Conventional DC or AC operation with automatic switching to the
appropriate operating mode
- All CVs must be programmed with DCC and Motorola digital devices
- Programmable in DCC mode via register, CV directly or page programming
- Upgradable via flash memory
- dimensions: 19 x 16 x 5 mm
For more information and technical data, please visit the manufacturer's website.
*Follow the instructions included with the product.