CYJANOACRYL Glues 20g MEDIUM JOKER

Joker cyanoacrylate glue of medium consistency will bond metal, glass, wood, rubber, plastic (in small amounts), ceramic surfaces, EPP and other materials in a few to several seconds. Indispensable especially in typical modeling work with wood, where it quickly forms a strong, tight and durable bond.

Packed in a round, leak-proof bottle with an applicator - glue content in the bottle: 20g.

Thanks to its medium consistency, Joker cyanoacrylate glue becomes an excellent, universal and fast binder with a very wide range of applications. It is perfect for both typical modeling and household work, regardless of whether the glued surface is porous or smooth, absorbent or not allowing penetration. After application, part of the glue will fill the cavity or "flood" the gap, while the remaining part will be held on the surface, where it will still be possible to tighten the next element. In modeling applications, the medium glue will be especially suitable for EPP foams as well as for everyday work with balsa and other types of wood.

In order to instantly harden the surfaces to be glued, the glue is recommended to be used in tandem with Joker activator (accelerator) spray, which, when applied to the gluing area, will instantly harden the bond and complete the gluing process.

During use, basic safety rules should be observed - the glue glues human skin dangerously fast, is highly poisonous, and its fumes are harmful. Glue should not be used by minors, unless under the close supervision and guidance of an adult.

Also available in our store is a debonder for CA adhesives, which effectively and quickly neutralizes the glue in accidentally glued areas.

The durability of the glue depends on the temperature of its storage. Once opened, the adhesive is recommended to be stored in a refrigerator or other cool place, not exposed to sunlight or other sources of light and heat.

Shelf life depending on the storage temperature:
+ 20 deg C. - 6 months
+ 5 deg. C. - 12 months
(this does not apply to already glued surfaces)

Note: CA glue, regardless of its density, is not recommended for gluing paper, polystyrene, depron, lightweight polystyrene foam, delicate fibers (and other textile materials), as well as for use in precision plastic modeling, due to the possibility of over-melting, undesirable hardening or, in the case of very delicate surfaces, deformation of the glued surface.

Attention !

Some materials such as polystyrene, foams and the like may be damaged during gluing, so always make a test on the material before using the glue.

*Follow the instructions attached to the product.