CYJANOACRYL Glues 20g VERY RARE JOKER

Joker cyanoacrylate glue, with a very thin, almost "volatile" consistency, will bond metal, glass, wood, rubber, plastic (in small amounts), ceramic surfaces, EPP and other materials in just 1-3 seconds. Indispensable especially in typical modeling work with wood, where it quickly forms a strong, tight and durable bond.

Packed in a round, leak-proof bottle with an applicator - glue content in the bottle: 20g.

The very thin consistency of cyanoacrylate glue gives it the ability to be easily applied in hard-to-reach areas, to penetrate porous surfaces or to effectively fill gaps. The volatile and very liquid form of the adhesive means that it can "run away" from the glued surface if it is smooth and non-absorbent, so it should be used on porous materials or allowing the adhesive to soak into its structure. It is also strongly recommended to apply it when the glued surface is positioned horizontally. Super thin glue is also one of the fastest-gluing (and also fastest-drying) adhesives on the market - most materials will be permanently glued "dry" in just 1-3 seconds. Super thin glue is even indispensable for precise work with thin balsa strips - it soaks into the wood perfectly and allows spot bonding two, even perpendicularly placed small surfaces together without leaving a lint or trace on the joint (for example, when "cross bonding" two thin balsa boards).

To instantly harden the surfaces to be glued, we recommend using the adhesive in tandem with Joker activator (accelerator) spray, which, when applied to the bonding area, will instantly harden the bond and complete the bonding process.

During use, basic safety rules should be observed - the glue glues human skin dangerously fast, is highly poisonous, and its fumes are harmful. The glue should not be used by minors, unless under the close supervision and guidance of an adult.

Also available in our store is a debonder for CA adhesives, which effectively and quickly neutralizes the glue in accidentally glued areas.

The durability of the glue depends on the temperature of its storage. Once opened, the adhesive is recommended to be stored in a refrigerator or other cool place, not exposed to sunlight or other sources of light and heat.

Shelf life depending on the storage temperature:
+ 20 deg C. - 6 months
+ 5 deg. C. - 12 months
(does not apply to already glued surfaces)

Note: CA glue, regardless of its density, is not recommended for gluing paper, polystyrene, depron, lightweight polystyrene foam, delicate fibers (and other textile materials), as well as for use in precision plastic modeling, due to the possibility of over-melting, undesirable hardening or, in the case of very delicate surfaces, deformation of the glued surface.

Attention !

Some materials such as polystyrene, foams and the like may be damaged during gluing, so always make a test on the material before using the glue.

*Follow the instructions attached to the product.